| |
18"Wide x 15 Foot Long 240 Volt Sno*Melter Mat (50Watts/Sqft.)
|
|
| Sno*Melter Brochure
| Sno*Melter Installation Guide
| Sno*Melter Cost Effectiveness |
The
Sno*Melter system uses highly efficient heating cables formed into mats
that install quickly and economically. They are placed about 2" below
the surface of asphalt, under pavers, or in concrete, and connect up to
standard 240 voltage. Sno*Melter mats are available in 18" or 36"
widths, and measure from four to thirty feet in length. Because
Sno*Melter mats can be reshaped on the job site, gentle curves in
walkways, driveways, etc. can be accommodated.
Sno*Melter mats are
more effective than traditional snow removal methods, and have no
moving parts. Properly installed, mats normally provide trouble-free
service as long as the pavement or concrete in which they are embedded
is not disturbed or damaged. Electric mat provide reliable, convenient
snow melting.
Special
Order Sno*Melter mats are available in 208 VAC, 240 VAC, 277 VAC, 347
VAC, 480 VAC, and 600 VAC with cold lead lengths available in 5 foot
increments up to 75 feet. Please contact customer service for pricing
and availability.
CAUTION: Mats installed in poured concrete must not cross expansion or control joints.
|
|